SLAT 2027 Mock Test Today: How to Attempt It
The SLAT 2027 mock test is live today, 22 November, from 10 am to 7 pm. Here is how to log in, attempt all 60 questions in 60 minutes, and use the result.
SLAT 2027 Mock Test Today: How to Attempt It
The SLAT 2027 official mock test is live today, 22 November 2026, and the window closes at 7 pm. If you registered for SLAT 2027 and paid the fee by 20 November 2026, you should have received the mock test link, username and password on your registered email, SMS and WhatsApp. This is the last official practice paper before the real exam on 19 and 26 December 2026, and it follows the real pattern exactly: 60 multiple-choice questions in 60 minutes, five sections of 12 questions each, one mark per question, and no negative marking. This guide explains who can attempt it, how to log in, how to plan your 60 minutes, and what to do with your result tonight.
As of 22 November 2026, the facts are these. Symbiosis International (Deemed University) is running the final official mock test for the Symbiosis Law Admission Test (SLAT) 2027 today, between 10 am and 7 pm. You can start the test at any time inside that window, but you get only one attempt, and the 60-minute clock starts when you begin. The university first set the eligibility cut-off at 15 November, then extended it so that candidates who completed registration and fee payment by 20 November at 11:59 pm are also eligible. If your login details arrived, you are in. If you registered after 20 November, you cannot take this mock, but you can still register for the real exam until 4 December 2026. Everything in this article is checked against the university's announcement as reported by two independent news sources, and the pattern against the official SLAT pattern published on slat-test.org.
5 Key Takeaways
- The SLAT 2027 official final mock test is live today, 22 November 2026, from 10 am to 7 pm. Start early in the window so a slow connection or a login problem does not eat your attempt.
- Only candidates who completed SLAT registration and fee payment by 20 November 2026 at 11:59 pm can attempt it. The cut-off was extended from 15 November, so check your messages even if you registered late in the week.
- Your login link, username and password were sent to your registered email, SMS and WhatsApp. Check all three, including the spam folder, before you look for help.
- The mock follows the real pattern: 60 questions in 60 minutes, five sections of 12 questions each, one mark per question, and no negative marking, so attempt every question.
- You get one attempt only. Treat it like the real exam, analyse your section scores tonight, and use the result to plan the 27 days left before SLAT Test 1 on 19 December.
The Mock Test Today: What Is Live and When
The mock is not a sample paper you can download and solve at your own pace. It is a timed online test on the official portal, and it is open for one day only. The table below puts the whole day in one place, so you can check your own position in a minute and then get ready instead of searching for updates.
| Detail | What it is today |
|---|---|
| Mock test date | Sunday, 22 November 2026 |
| Test window | 10 am to 7 pm |
| Who can attempt | Candidates who completed SLAT 2027 registration and fee payment by 20 November 2026, 11:59 pm |
| How you get in | Mock link, username and password sent to your registered email, SMS and WhatsApp |
| Duration | 60 minutes, counted from the moment you start |
| Questions | 60 multiple-choice questions |
| Attempts allowed | One attempt only |
| Mode | Online, from your own laptop or desktop |
Two points in this table deserve attention. The first is the eligibility extension. The university first announced 15 November as the last date to qualify for the mock, and our earlier guide on this blog explained that cut-off. The university then extended the mock registration dates so that more candidates could take the test, and the final cut-off became 20 November at 11:59 pm. That is why the check that matters today is simple: did you register and pay by 20 November? If yes, your login details should be with you. If you registered on 21 or 22 November, you missed this mock, and no request can reopen it, because the test runs on a fixed one-day window.
The second point is the window. Ten in the morning to seven in the evening gives you nine hours to choose from, but that does not mean you should wait until the evening. Start in the late morning or early afternoon. That leaves time to fix a login problem, restart a frozen browser, or switch to a better connection without losing your one attempt. A candidate who starts at 6:30 pm and hits a problem at 6:45 pm has no time left to recover. The mock is 60 minutes long, so a start at 5:30 pm still finishes comfortably inside the window, but a start after 6 pm is a needless risk.
How to Log In and Start the Mock
Getting into the test takes five minutes if your details are ready, and it can take an hour if they are not. Do the preparation first, then start. The steps below follow the university's instructions for the official mock.
Step 1: Find your login details. Open your registered email inbox and search for a message from Symbiosis or the SLAT test portal. Check the spam and promotions folders too, because automated messages often land there. Then check your SMS inbox and WhatsApp for the same link and credentials. The link, username and password are sent to all three places, so finding them in any one of them is enough. Keep your SLAT ID handy as well, in case the login screen asks for it.
Step 2: Set up your device and your room. Use a laptop or desktop computer, not a phone. A phone screen is too small for 60 questions in 60 minutes, and a call or a notification can break your focus. Sit somewhere quiet, plug in your charger, and test your internet connection before you start. Close every other tab and application, turn your phone to silent, and keep a pen and a blank sheet of paper beside you for rough work. Tell the people at home that you cannot be disturbed for the next hour.
Step 3: Open the link and log in. Click the mock test link from the university's message and enter the username and password exactly as sent. Do not share these credentials with anyone, and do not open the test on two devices at once. The earlier official mock warned that using more than one device could block the account, and the same rule applies today. If the password does not work, copy and paste it instead of typing it, because a single wrong character is the most common reason for a failed login.
Step 4: Read the instructions screen before you press Start. The instructions page tells you how to move between questions, how to mark a question for review, and how the timer works. Read it fully. Candidates who skip this page lose minutes later, when they are trying to work out how to go back to a question they skipped. Check that the timer shows 60 minutes and that all five sections are listed before you begin.
Step 5: Start only when you are ready. Once you press Start, the 60-minute clock runs without a pause. Do not start the test and then go looking for a notebook, water, or a charger. Have everything within reach first. If your login details have not arrived at all, do not keep refreshing the inbox for an hour. Contact the SLAT helpdesk through the official portal, slat-test.org, and keep your registration details ready when you write to them.

What the Mock Looks Like: The SLAT 2027 Pattern
The mock follows the real SLAT pattern, which is what makes it useful. It is a computer-based test of 60 multiple-choice questions to be answered in 60 minutes. There are five sections of 12 questions each: Logical Reasoning, Legal Reasoning, Analytical Reasoning, Reading Comprehension and General Knowledge. Each question carries one mark, and there is no negative marking. That last fact shapes the whole attempt strategy, as the next section explains.
| Section | Questions | Marks | What it tests |
|---|---|---|---|
| Logical Reasoning | 12 | 12 | Arguments, assumptions, conclusions, series and patterns |
| Legal Reasoning | 12 | 12 | Legal principles applied to facts, basic legal awareness |
| Analytical Reasoning | 12 | 12 | Puzzles, arrangements, data-based reasoning |
| Reading Comprehension | 12 | 12 | Passage reading, inference, vocabulary in context |
| General Knowledge | 12 | 12 | Current affairs, static GK, basic legal and constitutional facts |
| Total | 60 | 60 | 60 minutes, no negative marking |
Sixty questions in sixty minutes means one minute per question on average. That is a fast paper, and it is deliberately fast. The test is not checking whether you can solve a hard puzzle in five minutes. It is checking whether you can read, decide and move on. Students who spend three minutes on one Analytical Reasoning set lose three questions elsewhere. The mock today is your one chance to feel that pace under official conditions before the real exam, and the pace is the main thing to learn from it.
Every section carries the same weight, 12 marks out of 60, or 20 per cent of the paper. That is different from CLAT, where the sections are uneven and Legal Reasoning alone is worth a quarter of the paper. In SLAT, no section can be ignored and no section can save you on its own. A student who is strong in Reading Comprehension but weak in General Knowledge loses the same 12 marks as a student who is weak in the section they like least. The mock will show you, section by section, where those 12-mark blocks are leaking.
Because there is no negative marking, the scoring logic is different from CLAT and AILET, where a wrong answer costs 0.25 marks. In SLAT, an unattempted question and a wrong answer both score zero, so there is no reason to leave a question blank. Every question deserves an answer, even if it is an educated guess in the last thirty seconds. That does not mean guessing wildly from the first minute. It means you should never run out of time with blank questions on the screen. The mock is the place to practise that discipline, not the real exam.
Your 60-Minute Plan for the Mock
A 60-minute paper with 60 questions needs a plan before you press Start, because there is no time to invent one during the test. The plan below works for most students. It has three passes, and each pass has a job. Adjust the order of sections to your own strengths, but keep the three passes and the time limits.
| Pass | Time | What to do |
|---|---|---|
| First pass | 0 to 40 minutes | Answer every question you can solve in under a minute. Mark the rest for review and move on without a second look. |
| Second pass | 40 to 52 minutes | Return to the marked questions. Spend up to two minutes on each. Pick the best answer and move on. |
| Final sweep | 52 to 60 minutes | Answer every question that is still blank, even if it is a guess. Check that no question is left unattempted. |
Start with your strongest section. Confidence in the first ten minutes sets the tone for the whole hour, and a strong start also banks marks early. Many students start with General Knowledge, because those questions are either known or not known, and each one takes seconds rather than minutes. Reading Comprehension needs unbroken reading time, so do it when your mind is fresh, not in the last ten minutes when the timer is pressing. Legal Reasoning questions ask you to apply a principle to a set of facts, so read the principle first, then the facts, then the options, in that order.
Analytical Reasoning is the section that most often breaks a plan. A puzzle set can look easy and then take four minutes. Set a hard rule for yourself before you start: if a set is not solved in two minutes, mark it, move on, and come back in the second pass. You can always return to it. You cannot get back the three questions you lost while staring at it. The same rule applies to any single question. Two minutes is the maximum for one question in a 60-minute paper. After that, the question is costing you more than it is worth.
Watch the timer at three points only: after 20 minutes, after 40 minutes, and after 52 minutes. Checking it every minute wastes attention and raises stress. At 20 minutes you should be near question 20. At 40 minutes you should be finishing your first pass. At 52 minutes you should be in the final sweep with no blank questions left. If you are behind at any of these points, speed up by answering the quick questions first and leaving the long ones for the second pass, rather than by rushing through questions you could have solved.

6 Mistakes That Waste a Mock Attempt
A mock test is useful only if you attempt it the way you will attempt the real exam. The six mistakes below are the ones that turn a good mock into a wasted hour, and all six are easy to avoid once you know them.
1. Starting late in the window. The window closes at 7 pm, and the test takes a full hour. A start at 6:15 pm leaves no room for a login problem, a slow connection, or a frozen screen. Start in the late morning or early afternoon, when you still have time to recover from a problem.
2. Attempting it on a phone. The real SLAT is a computer-based test at a test centre. A phone changes the reading speed, the screen layout, and the way you move between questions, so the score you get on a phone does not tell you how you will do on a computer. Use a laptop or desktop, the same kind of screen you will face on 19 or 26 December.
3. Spending four minutes on one puzzle. One question is worth one mark, the same as every other question. A puzzle set that eats four minutes costs you three other marks. Mark it, move on, and return to it in the second pass with fresh eyes.
4. Leaving questions blank. There is no negative marking in SLAT. A blank question scores zero and a wrong answer scores zero, so a guess can only help. In the final eight minutes, answer every remaining question. Even a guess made by eliminating two wrong options has a one-in-two chance of scoring.
5. Skipping the instructions page. The instructions explain how to mark questions for review, how to move between sections, and what happens when the timer ends. Candidates who skip this page waste minutes during the test working out the interface. Five minutes of reading before you start saves more time than it costs.
6. Walking away without analysing the result. The mock is not a score, it is a diagnosis. A student who attempts the mock and never looks at the section scores has spent an hour to learn one number. The next section explains how to read the result tonight, while the paper is still fresh in your mind.
After the Mock: How to Read Your Result Tonight
Do the analysis on the same day, while you still remember which questions felt hard and which ones you guessed. Wait until tomorrow and you will remember only the total score, which is the least useful number in the whole report. Set aside 45 minutes tonight for this, and work through the four steps below.
Step 1: Look at section scores, not the total. A total of 38 out of 60 tells you almost nothing. A section split of 10 in Logical Reasoning, 9 in Legal Reasoning, 8 in Analytical Reasoning, 8 in Reading Comprehension and 3 in General Knowledge tells you exactly where to work. Because every section is worth 12 marks, the weakest section is the cheapest place to gain marks in the next 27 days. Write the five section scores down in a notebook, so you can compare them with your next mock.
Step 2: Sort every question into four groups. The four groups are: correct and fast, correct and slow, wrong, and guessed. Correct and fast needs no work. Correct and slow needs a faster method, not more knowledge. Wrong needs you to find the exact reason, a wrong principle, a misread fact, or a rushed option. Guessed needs a check on whether your guessing method works, because in SLAT you will guess on some questions in the real exam too, and a good elimination habit is worth marks. Our guide on how to analyse mock tests explains this four-group method in full, and it works for SLAT exactly as it works for CLAT and IPMAT.
Step 3: Fix the biggest leak first. Most students try to fix everything at once and fix nothing. Pick the one section with the lowest score and give it 45 minutes a day for the next week. If it is General Knowledge, that means 20 minutes of current affairs and 25 minutes of static GK every day. If it is Analytical Reasoning, that means two puzzle sets a day with a timer, not ten sets in one sitting. If it is Reading Comprehension, that means one passage a day read properly, with the questions answered from the passage and not from memory.
Step 4: Write down three changes for the real exam. The mock should change how you attempt the paper, not just what you study. Write down three concrete changes, such as starting with General Knowledge, capping every puzzle at two minutes, or leaving the last eight minutes for the final sweep. Three changes are enough to remember under pressure. Ten changes will be forgotten by the second question.

What Happens Next: SLAT 2027 Dates After Today
The mock is a checkpoint, not the end of the process. The real exam is in two slots, and you can appear for one or both, with the higher score counting. Registration is still open for students who have not applied yet, and the admit cards come out in December. The table below lists the dates that matter from today onwards.
| Event | Date | What it means |
|---|---|---|
| SLAT 2027 final mock test | 22 November 2026, 10 am to 7 pm | Live today, one attempt, only for candidates who registered and paid by 20 November |
| Registration closes | 4 December 2026 | Last date to register for SLAT 2027 at all; no changes allowed after this |
| Admit card, Test 1 | 11 December 2026 | Download from slat-test.org before your test date |
| Admit card, Test 2 | 18 December 2026 | Download from slat-test.org before your test date |
| SLAT Test 1 | 19 December 2026 | First of the two test dates, computer-based test |
| SLAT Test 2 | 26 December 2026 | Second test date; the higher of the two scores counts |
| SLAT 2027 result | Around 12 January 2027 (expected) | Declared on slat-test.org |
If you missed the mock because you registered after 20 November, the next step is simple: complete your registration before 4 December and start preparing for the real exam. The mock was a practice paper, not a condition for appearing. You lose one rehearsal, not your chance. Take a full-length timed mock from another source this week instead, and follow the same three-pass plan and the same analysis method above.
Many SLAT candidates are also appearing for CLAT on 6 December and AILET on 13 December. If you are one of them, remember that the three exams punish different habits. CLAT and AILET both carry negative marking of 0.25 marks, so the guessing rule that works in SLAT does not work there. The CLAT admit cards are already out, and our guide on downloading the CLAT admit card covers what to check on it. Keep the three exams separate in your mind: different marking, different pace, different plan.
The four Symbiosis Law Schools that admit through SLAT are in Pune, Noida, Hyderabad and Nagpur, and they offer the five-year integrated law programmes, BA LLB (Hons.) and BBA LLB. Your programme choices and fees are part of the registration itself, so if you have not registered yet, decide your programmes before you pay, because no changes are allowed after registration. Our earlier guide on the SLAT 2027 final mock test explains the registration steps and the programme fee in detail.
Frequently Asked Questions
1. I registered for SLAT 2027 after 20 November. Can I still take the mock test today?
No. The mock is open only to candidates who completed registration and fee payment by 20 November 2026 at 11:59 pm. If you registered later, you can still appear for the real exam, because registration stays open until 4 December 2026. Take a timed full-length mock from another source this week and analyse it the same way.
2. I have not received the mock test login details. What should I do?
Check your registered email first, including the spam and promotions folders, then your SMS inbox and WhatsApp, because the link, username and password are sent to all three. If you still cannot find them, contact the SLAT helpdesk through the official portal, slat-test.org, with your SLAT ID and registration details ready. Do this early in the day, while the window is still open.
3. Can I attempt the mock test more than once?
No. The official mock allows one attempt only. Once you submit the test, you cannot re-enter it, and opening it on a second device can block your account. Start only when you are ready, with a charged laptop, a stable connection, and an undisturbed hour.
4. Is there negative marking in the SLAT 2027 mock test?
No. Each question carries one mark and there is no negative marking for a wrong answer, in the mock and in the real exam. That is why you should attempt all 60 questions. A blank question and a wrong answer both score zero, so an educated guess in the last minutes can only add marks.
5. When is the real SLAT 2027 exam, and can I take both test dates?
SLAT Test 1 is on 19 December 2026 and Test 2 is on 26 December 2026, both as computer-based tests. You can appear for one or both, and the higher of the two scores counts for the final result. Admit cards come out on 11 December for Test 1 and 18 December for Test 2, and the result is expected around 12 January 2027.
Conclusion
The SLAT 2027 official mock test is live today, 22 November, from 10 am to 7 pm, and it is the closest rehearsal you will get before the real exam. Log in with the credentials sent to your email, SMS and WhatsApp, use a laptop on a stable connection, and attempt the paper in three passes: 40 minutes for the first pass, 12 minutes for the marked questions, and 8 minutes for the final sweep, with no question left blank. Then spend 45 minutes tonight on the analysis, find your weakest section, and give it 45 minutes a day for the next week. There are 27 days left before Test 1 on 19 December, and that is enough time to fix one section properly if you start from what the mock shows you today. Do not let the mock end at the submit button. The score is only useful if it changes what you do tomorrow.
If you want more timed practice before 19 December, Skylor's Pariksha mock series follows the same exam pattern and the same analysis method used in this guide. Read our guide to analysing mock tests after your attempt, and bring your section scores to your next study session. The students who improve fastest are not the ones who take the most mocks. They are the ones who learn the most from each one.
Need Personalized Diagnostic Guidance?
Speak directly with Skylor's academic directors in Bathinda. Discuss batch schedules, test analytics, and personalized preparation strategies.